Wood sliding closet doors – These are instructions to update wood sliding closet doors. The first is removing the door from the closet. Place the door on sawhorses in a well-ventilated workspace. Sand the door on all sides using an orbital sander. Wipe with a tack cloth. Second, choose a modern panel design for the door.
Cut two pieces of 1/4-inch by 3-inch trim controls the width of the door. Place the trim on the top and bottom of the wood sliding closet doors. Measure between the pieces and cut two pieces to trim the sides of the door. Measure between cheek and cut two pieces. Dry fit your pieces. The door should appear to have three plates of the same size. Slip edges of the pieces with a sanding block.
Third, apply carpenter’s glue on the back of each piece of wood. Installing your top and bottom boards first. Installing boards others and your boards inside the last. Clamps with three clamps to hold the trim in place for 24 hours. Fourth, caulk along the seams and holes in both sides of the door have been paneled and then paint in an updated color. And the instructions to update wood sliding closet doors were finished now.