Barn Door Designs – Double barn door are a classic addition to any home or work barn. These double doors allow greater access to the barn and give plenty of room to pull in large machines and animals. Double doors can also be in shape and size to any length, width or height, offering more options and better access. One open, or both, depending on how and what you want to store.
Barn door designs, Cut four 4 by 4 boards up to the barn door. Cut four 4 by 4 boards to half the width of the opening of the barn door, less than 8 inches to compensate for the width of the vertical boards. Place the vertical and horizontal joints in the form of doors right next to each other. Make sure the cuts are accurate, and then nail the frame together using metal reinforcements and galvanized nails or screws.
Cut two 4-by-4 boards to the width of each door least 8 inches, and nailing directly to the back of the frame. Cut your plank to the length of the barn door designs, and put through the frames. Nail the boards to the top, middle and bottom of the frame cross part. His barn doors must be very rigid on this point, but enough light to open and close easily. Add fits barn doors. Cut a strip of bulletin board to the total width of each door and nailed to the door right through the center. Ensure that each door is square; make adjustments before hanging up these doors.